Tiếng Việt | English

Hướng dẫn sử dụng Cân Treo JC

Hướng dẫn sử dụng Cân Treo JC

JC User Manual

1. Introduction

This manual contains installation and operation instructions for the JC crane scale. Please read the manual completely before installation and operation.

2. Precautions

  • Before using, please check and make sure every part is in good condition. Provided there is any broken, please inform your dealer
  • Avoid sudden temperature changes (suitable operating temperature is between -10℃~ 40℃.)
  • Disconnect the power supply when cleaning the scale.
  • Do not use the scale in the rain or heavily polluted environment.
  • Never use the crane over the maximum permitted weight, it will cause danger of breaking.
  • Always make sure that there are no living beings or materials below the load that could cause injured or damaged.
  • Service should be performed by authorized personnel only.

Hướng dẫn sử dụng Cân Treo JC3. Dimension

 

 

 

 

 

 

 

 

MODEL

A

B

C

D

E

F

G

JC-06

260

195

50

40

620

73

200

JC-1

260

195

50

40

620

73

200

JC-2

260

195

60

50

650

73

200

JC-3

260

195

60

50

650

73

200

JC-5

260

195

60

42

730

80

210

JC-10

260

205

70

52

830

92

220

JC-15

260

215

80

60

960

135

230

 

 

 

 

 

4. Specifications & Features

 

4-1 Specifications

Model

Max.Cap

Division 1

Division 2

JC-06

600kg

0.2kg

0.1kg

JC-1

1000kg

0.5kg

0.2 kg

JC-2

2000kg

1kg

0.5 kg

JC-3

3000kg

1kg

0.5 kg

JC-5

5000kg

2kg

1 kg

JC-10

10000kg

5kg

2 kg

JC-15

15000kg

10kg

5 kg

JC-20

20000kg

10kg

5 kg

JC-30

30000kg

20kg

10 kg

 

4-2 Features

  • 360°freely swiveling hook
  • Die-casting aluminum housing with corrosion-proof and antistatic functions
  • Auto shut off for power saving
  • Wireless controller as a standard
  • Anti-collision key design for a better key service time
  • AT-89 processor and A/D Conversion Technology
  • Anti-interference design

 

 

 

 

 

 

5. Keyboard

 

HOLD

Hold the current weighing value

SWITCH

Choose the division

ZERO

Bring display value back to “0” during weighing

 

6. Operation

6-1 Power on

Press ON/OFF to power on. The display will first show the max capacity and then after 5 seconds it will turn back to zero and ready for operation

Note: It is recommended to allow scale 3-5min of warm-up time before starting weighing operation.

6-2 Zero

Press ZERO to zero the display

6-3 Weighing

Begin with no load on the scale, the display reading zero. Place item(s) to be weighted on the scale. The display will show the weight

6-4 Tare

Under the weighing mode, place the container on the scale. Press ZERO to tare. 

6-5 Battery recharge

The charge lamp turns green from red when the recharging is completed

  • When the battery indicator is flashing, it means the low battery. Please recharge. However, the scale can continue to operate for about 5hours without recharge
  • After the battery indicator is on for several hours without recharge or there is no more power in the battery, the scale will be powered off automatically.
  • After recharge, the screen still cannot display, it indicates that either there is difficulty in battery recharging or a damaged battery. Please contact the service person.

 

7. Calibration procedure

Note: make sure the standard the weights are available when doing calibration

  1. Press ZERO when power on the crane scale, while “SPEN” is displayed on the screen
  2. Press ZERO to enter the calibration,while “00000” is displayed on the screen
  3. Press HOLD to choose the weighing value, press SWITCH to move the decimal point

Note: It is better to choose the value which is close to the max capacity.

  1. Put on the corresponding weight
  2. Press ZERO to save

 

8. Setting mode

  1. Press SWITCH when power on the crane, while “Hướng dẫn sử dụng Cân Treo JC” is displayed on the screen
  2. Press HOLD or SWITCH to shift the sound modes.

0= no sound   1= with sound

  1. Press ZERO to move to hold function setting mode, while “Hướng dẫn sử dụng Cân Treo JC” is displayed on the screen
  2. Press HOLD or SWITCH to shift the hold modes.

0= no hold function   1=with hold function

  1. Press ZERO to move to zero function setting mode, while “Hướng dẫn sử dụng Cân Treo JC” is displayed on the screen
  2. Press HOLD or SWITCH to shift the zero modes.

0=zero function is allowed when not stable  1=zero function is not allowed when not stable

  1. Press ZERO to move to saving setting, while “Hướng dẫn sử dụng Cân Treo JC” is displayed on the screen
  2. Press HOLD or SWITCH to shift the saving modes.

0=not save  1=save

  1.  Press ZERO to restart

 

 

 

 

 

 

 

 

 

 

 

9. Option

Controller description

Hướng dẫn sử dụng Cân Treo JC

 

 A

Choose division

 B

Hold function

 C

Zero function

 

 

Note: Pull out the aerial when using.

Hãy share để mọi người cùng biết Cân Vạn Phú cung cấp sản phầm Jadever chính hãng.

Hướng dẫn sử dụng Cân Treo JC Hướng dẫn sử dụng Cân Treo JC

Hướng dẫn sử dụng Cân Treo JC, Huong dan su dung Can Treo JC

10/ 10 - 3340 phiếu bầu

Back Trở lại      Print In      Đã xem Số lần xem: 0

Cty TNHH Sản Xuất Thương Mại Dịch Vụ Cân Vạn Phú

19 Đường D3, Phường 25,Q. Bình Thạnh, TP. Hồ Chí Minh
(084).8.35 030609       Fax: (084).8.62 585018  Hotline: 0987069696
www.jadever.vn
vanphu@canvanphu.com
 
   
 
 

© Copyright 2014 www.canvanphu.com, all rights reserved.